Télécharger Imprimer la page

Worx MakerX WX747 Notice Originale page 18

Publicité

INTENDED USE:
The machine is intended for cleaning and painting.
ASSEMBLY
1. Fitting the nozzle. (See Fig. A1, A2, A3, A4)
Long nozzle and short nozzle are suitable to dust
surfaces. The difference
between them lies in the air force. A short nozzle is
more powerful.
Brush adapter should be equipped with long nozzle or
short nozzle to use.
Air blade nozzle is used to clean up trash and dust in
crevices.
In addition to cleaning, tip nozzle and air blade nozzle
can be used for painting.
EN
18
2. Connect the mini blower to the hub. (See Fig. B)
WARNING: Before operation, make sure the
speed control button on the hub is at the"Min"
position. (See Fig. C)
OPERATION
1. Confirm the speed control button is set to
"Min". Grasp the tool by the grip. Press the On/Off
switch on the hub and that on the mini blower to start
the machine. (See Fig. D)
WARNING: Never use tools with defective On/
Off switch. In the case of all other types of
technical faults, please contact helpline or local
service center.
2. Adjust speed as needed. (See Fig. E)
The air speed is adjustable for a wide range of
applications. High speed can be used
to dust electronic devices, such as a computer
keyboard, laptop, copy machine, medical equipment,
camera, model vehicles, and blinds etc.
And low speed can be used for acrylic painting.
NOTE: After usage, press the on/off switch on the mini
blower and that on the hub to turn off the machine
and disconnect it from the hub. For sake of safety,
adjust the speed control button to "Min" position once
completing the operation.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0
The recommended ambient temperature range for the
charging system during charging is 0
Details regarding safe disposal of used batteries
At the end of the life of the appliance, remove the
battery pack safely before disposing of the appliance.
Do not throw batteries away or throw them in the
normal trash can. Also do not dispose of the battery
with the machine. Remove the used battery pack
from the appliance and dispose of it at the nearest
or convenient dedicated recycling facility. If in
doubt, consult your local environmental protection
C-45
C.
o
o
C-40
C.
o
o

Publicité

loading

Ce manuel est également adapté pour:

Makerx wx747.x