Publicité
WARNING: The vibration emission value during
actual use of the power tool can differ from the declared
value depending on the ways in which the tool is used
dependant on the following examples and other
variations on how the tool is used:
How the tool is used.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it
is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
these instructions.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed.
WARNING! To be accurate, an estimation of
exposure level in the actual conditions of use should also
take account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle but not actually doing the job. This may
significantly reduce the exposure level over the total
working period.
Helping to minimise your vibration exposure risk.
Maintain this tool in accordance with these instructions
and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibra-
tion accessories.
Plan your work schedule to spread any high vibration tool
use across a number of days.
Category
Model
WA7160
20V Hub/
HubX
WA7161
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
MakerX series tools and 20V Hub/HubX are specially
designed to work together, so do not attempt to use any
other devices.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
Capacity
Input: 20 V
10 A
Max.
Output: 20 V
10
A Max.
Input: 20 V
10 A
Max.
Output: 20 V
10A
Max.
Or Output: 5 V
2 A
(USB port)
EN
17
Publicité
