Publicité
®
4.5.5
MultiPro
next Gyno, adjust pelvic section manually
The pelvic section can be adjusted in three positions.
Pull the ball handle (1) on both sides and move the catch (2) to the desired locking position
Important note!
Ensure that the locking positions are correctly engaged.
4.5.6
Adjusting the footrests (accessories)
The footrests (1) can be individually adjusted to the patient. Each side can be adjusted individually.
Loosen the star grip (2) by turning it anti-clockwise and move the heel support (1) to the desired position. Then tighten the star
grip (2) again by turning it clockwise.
2
3
Release the locking lever (3) by turning it anti-clockwise. You now have the option of removing the footrest from the bed or
turning the footrest to the desired position. Lock the footrest again by tightening the locking lever (3) with a clockwise turn.
The handle of the locking lever (3) can be rotated for optimum handling. To do this, pull the handle of the locking lever (3) and
turn it in any direction.
Datum: 17.10.2024
2
1
3
MultiPro® next
1
57 von 64
Publicité
