Publicité
To adjust the brightness
To make it brighter: Hold down the push-button switch (2) when the device is in
switched-on mode. When the desired level of brightness has been reached, let go.
To make it less bright: Hold down the push-button switch (2) again. When the
desired level of brightness has been reached, let go.
Changing the colour of the light
With the product variant CCT, the user can select the type of lighting they want in-
stead of the function described previously for adjusting the brightness (not avail-
able with the ophthalmoscope):
The LUXAMED medical device has two different types of lighting.
1. Warm white light with 3000 K
2. Cold white light with 6000 K
The push-button switch (2) must be pushed to change the colour. To change it
again, repeat the process.
To turn off the device
If the medical device is on, push the switch (2) once.
The medical device also has an automatic shut-off function. It will turn off the
device after 3 minutes.
To change the batteries (for the 2.5 V variant)
To change the battery, open the battery compartment lid (3) by turning it to the left.
CAUTION: Make sure to put the poles of the new batteries in the correct position
(the plus pole of the battery faces the head of the medical device and the minus
pole faces the battery compartment lid). Batteries placed incorrectly can damage
the LUXAMED® medical device and lead to expiry of warranty claims.
Put the battery compartment lid (3) back on and close it by turning it to the right.
Do not change the batteries when in the vicinity of patients.
Troubleshooting
If the light of the device flickers during operation, please replace the batteries con-
tained in the device.
To change rechargeable batteries (for the 3.7 V variant)
Rechargeable batteries may only be changed by authorised personnel. In the
event of a defective rechargeable battery, please send the entire instrument
- 19 -
Publicité
