Publicité
orbital stroke rate for approximately three minutes without
load to cool it down.
Application Overview
Range of applications
Sanding plate
– Sanding surfaces and corner spaces
80 x 130 mm
– Sanding rebates in windows and doors
– Sanding old paint and varnish
– Sanding wood
– Sanding solid wood edges and veneer edges
Sanding plate
– Sanding surfaces and corner spaces
100 x 110 mm
– Sanding rebates in windows and doors
– Sanding old paint and varnish
– Sanding wood
Sanding plate
– Sanding slats
100 x 150 mm
– Sanding rebates and profiles
– Removal from surfaces with angles, corners
and edges
– Sanding old paint and varnish
– Sanding wood
Working Advice
Before carrying out any work on the power tool (e.g.
u
maintenance, tool change etc.), remove the battery
from the power tool. There is risk of injury from uninten-
tionally pressing the on/off switch.
Always wait until the power tool has come to a com-
u
plete stop before placing it down.
The material removal rate when sanding is primarily determ-
ined by the choice of sanding sheet and the preselected or-
bital stroke rate .
Only immaculate sanding sheets achieve good sanding per-
formance and make the power tool last longer. Switch the
power tool on, place the entire sanding surface against the
surface of the workpiece and apply moderate pressure as
you move the sander over the workpiece.
Be sure to apply consistent contact pressure in order to in-
crease the lifetime of the sanding sheets.
Excessively increasing the contact pressure will not lead to
increased sanding performance; rather, it will cause more
severe wear of the power tool and premature failure of the
sanding plate.
Do not use a sanding sheet for other materials after it has
been used to work on metal.
Use only original Bosch-sanding accessories.
Maintenance and Service
Maintenance and Cleaning
Before carrying out any work on the power tool (e.g.
u
maintenance, tool change etc.), remove the battery
from the power tool. There is risk of injury from uninten-
tionally pressing the on/off switch.
Bosch Power Tools
Application
Abrasive
Coarse sanding
P40–P180
Fine sanding
P220–P400
Coarse sanding
P40–P180
Fine sanding
P220–P400
Coarse sanding
P40–P180
Fine sanding
P220–P400
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Transport
The recommended lithium-ion batteries are subject to legis-
lation on the transport of dangerous goods. The user can
transport the batteries by road without further require-
ments.
English | 17
Speed setting
4–6
1–3
4–6
1–3
4–6
1–3
1 609 92A A29 | (04.11.2024)
Publicité
