Troubleshooting/Repair - Nikon COOLSHOT 20 Manuel D'utilisation

Troubleshooting/Repair

If your Nikon Laser Rangefinder should require repair, please contact your local dealer for details regarding where to
send it. Before doing so, you are advised to consult the Troubleshooting Table below.
Symptom
Unit does not turn on — LCD fails to
illuminate
Target range cannot be obtained
[- - -] ("Cannot measure") appears
Closer target cannot be measured
Target beyond a certain distance
cannot be measured
• Depress POWER ON/Measurement button.
• Check battery insertion.
• Replace the battery if necessary.
• Be sure that nothing, such as your hand or finger, is blocking the laser
emission aperture and laser detector.
• Be sure that the laser emission aperture and laser detector are clean.
Clean them if necessary.
• Be sure that the target shape and condition are appropriate to reflect the
laser beam.
• Replace the battery.
• Be sure to hold the unit steady while measuring.
• Be sure the target is within measuring range.
• Be sure that nothing, such as leaves or grass, is between the Nikon Laser
Rangefinder and the target.
• Be sure that nothing, such as leaves or grass, is between the Nikon Laser
Rangefinder and the target.
Check Points
En
Es
Fr
Pt
17