Changing The Distance Display Unit (M/Yd) (F1); Changing The Measurement Display Mode (F2) - Nikon COOLSHOT 80 i vr Manuel D'utilisation

■ Changing the distance display unit (m/YD) (F1)

En
Es
Factory default setting is yard (YD).
1. From standby, a long press (1.5 seconds or more) of the MODE button displays
Fr
the setting menu of the distance display unit (F1).
Pt
2. Short press (less than 1.5 seconds) of the PWR button switches units of meter
and yard.
*For COOLSHOT 80i VR, a short press (less than 1.5 seconds) of the MODE
button displays the setting menu of the measurement display mode (F2).
3. After setting, a long press (1.5 seconds or more) of the MODE button or
unoperated more than 8 seconds returns you to standby.
14
COOLSHOT 80i VR only

■ Changing the measurement display mode (F2)

Factory default setting is golf mode. Golf mode displays actual distance in upper digits,
and slope adjusted distance (horizontal distance ± height) in lower digits.
1. From standby, a long press (1.5 seconds or more) of the MODE button, then a short
press (less than 1.5 seconds) of the MODE button displays the setting menu of the
measurement display mode (F2).
2. Short press (less than 1.5 seconds) of the PWR button switches the measurement
display mode.
3. After setting, a long press (1.5 seconds or more) of the MODE button or unoperated
more than 8 seconds returns you to standby.
Modes are switched in the following order. Displayed items differ according to each setting mode.
Golf mode:
Slope adjusted distance (horizontal
distance ± height) and actual distance
Incline
Actual
distance
Slope adjusted
Decline
distance
(horizontal distance
± height)
Horizontal distance and height mode
Incline
Height
Horizontal
Decline
distance
N/A Actual distance mode
Actual
N/A
distance
Actual distance and height mode
Incline
Height
Actual
Decline
distance
En
Es
Fr
Pt
15