Publicité
English
Change All Lockers Heated/Ambient
Setting
1. On the Select Lockers screen, touch
2. Enter the Passcode and touch ENTER to access the
System Settings screen.
• The factory set Passcode is: 88888
3. On the "Heat Mode All Lockers" line, touch the
to toggle between "Ambient", "Heated", and "No Change"
selections.
• "No Change" keeps the ambient or heated setting for
individual lockers made in the "Change a Locker's
Heated/Ambient Setting" procedure.
• "Ambient" turns off ALL of the heating elements inside
each locker.
• "Heated" turns on ALL of the heating elements inside
each locker.
System Settings Screen
4. Touch the
to return to the Select Lockers screen.
Overtime Order
When an order is in the locker past the maximum order time,
the timer on the Select Lockers screen will turn red.
In order for the locker to be used for another order, the locker
must be cleared. Use the following procedure to reset an
overtime order.
1. Remove and discard food from locker.
2. Follow the "Clear a Single Order" procedure.
3. When the next order is ready, follow the "Placing an Order"
procedure.
F2GM-0424
Change the Passcode
1. On the Select Lockers screen, touch
for system settings.
2. Enter the Passcode and touch ENTER to access the
or
arrow
3. Touch SET PASSCODE.
NOTE: The CONFIGURATION selection on the System
4. On the Set Passcode screen, enter the current passcode
5. Enter the new password and touch ENTER.
6. Touch the
15
System Settings screen.
• The factory set Passcode is: 88888
88888
Passcode Screen
Settings screen is for factory use only.
System Settings Screen
and touch ENTER.
to return to the Select Lockers screen.
OPERATION
for system settings.
Publicité
