Publicité
OPERATION
Enter Order Code
3. Open locker(s) with flashing lights and remove food.
• The locker(s) will remain unlocked for 35 seconds. The
LED lights will flash while the locker is unlocked.
Simple (1) Claim
The order code is always '1' for picking up an order.
Name Only Claim
The customer will enter the name of the order for picking up an
order. Entering an order code is not an option in this setting.
Code Only Claim
The customer will enter the order code of the order for picking
up an order. Entering a name is not an option in this setting.
Open a Locker Manually
(single-sided models only)
Use this procedure to open a locker manually if the order wasn't
removed within 35 seconds.
1. On the Select Lockers screen, touch a locker number to open.
2. With the locker selected, touch LOCKER SETTINGS.
3. Enter the Passcode and touch ENTER to access the
Locker Settings screen.
• The factory set Passcode is: 88888
88888
Passcode Screen
4. On the Locker Settings screen, touch Clear Order.
5. Open locker and remove food.
Clear a Single Order
Use this procedure to clear an order.
1. On the Select Lockers screen, touch a locker number with
the order you want to clear.
2. With the locker selected, touch LOCKER SETTINGS.
3. Enter the Passcode and touch ENTER to access the
Locker Settings screen.
• The factory set Passcode is: 88888
4. On the Locker Settings screen, touch CLEAR ORDER.
NOTE: Clearing an order will clear the order from the selected
locker and all other lockers linked to the same order.
Change a Locker's Heated/Ambient Setting
Use this procedure to change a single locker's Heated/Ambient
setting.
1. On the Select Lockers screen, touch the desired locker
number to change the Heat/Ambient selection of that locker.
2. With the locker selected/highlighted, touch LOCKER
SETTINGS.
3. Enter the Passcode and touch ENTER to access the
Locker Settings screen.
• The factory set Passcode is: 88888
Locker Settings Screen
4. On the Locker Settings screen, touch AMBIENT or HEATED.
• Ambient selection will turn the heating elements off for
that locker.
• Heated selection will turn the heating elements on for
the locker.
• Allow the locker 30 minutes to reach operating
temperature.
5. Touch
to return to the Select Lockers screen.
14
English
F2GM-0424
Publicité
