Introduction - Medline EntraFloH2O Guide D'utilisation

INTRODUCTION

3
The EntraFlo H20™ Nutrition Delivery System is an easy to use, versatile device
for the administration of all enteral feeding solutions. Key features of this
device include:
PATIENT HYDRATION WITH
AUTOMATIC FLUSH
Patient hydration needs are facilitat-
ed by administering up to 500 mL of
water over a selected time interval (in
hours). Time interval is adjustable in
1 hour increments from 2 to 12 hours.
In addition, the final 25 mL of water is
automatically flushed through the line
just before the conclusion of the time
interval.
FEEDING DILUTION
Provide feeding dilution when neces-
sary by selecting Feeding Strength.
Feeding can be delivered at full
strength (FS), or diluted to
1 / , 1 / ,
2 3
delivery, no feeding).
PROGRAMMABLE FLUSH
AFTER DOSE IS DELIVERED
Deliver up to 500 mL of water in a
programmable water delivery to
hydrate the patient or flush the line
after the feeding dose limit is deliv-
ered. Water is delivered at a fixed rate
of 375 mL/hr.
1 / strength, or H
4
2
DELIVERY SET SECURITY
DOORS
Reduces the likelihood of accidental
dislodgment of sets and enables
immediate detection of a free flow
condition.
AUTOMATIC PRIMING
Automatic priming of feeding and
water through the administration set
allows nurse time to perform other
bedside duties and may help reduce
wasted sets due to improper manual
priming.
VERSATILITY
3 / 2 /
, ,
4 3
•
0 (all water
•
•
•
•
•
Feeding rate adjustable in 1 mL/hr
increments from 1–295.
Dose Limit adjustable in 1 mL/hr
increments from 1–2000.
Feeding Strength options include
FS (Fu ll Strength),
/ strength, or H
1
4
2
Water volume adjustable in 1 mL/
hr increments from 0–500.
Time Interval adjustable in 1 hour
increments from 2 to 12 hours,
with programmable flush avail-
able as dose is delivered.
Ability to select basic full strength
feeding delivery when water
delivery options are not desired.
3 / 2 / 1 / 1 /
, , , ,
4 3 2 3
0 (water only).