Publicité
Controls, connectors and indicators <rig. 2>
@
Display
The LCD shows all necessary information, including the playing time and track
number,
@ © F-SKIP [>>] and R-SKIP [|<<] buttons
@® © ©
When one of these buttons is pressed the playback position skips to the begin-
ning of the track (tune) before or after the current track being played.
To play a track after the current track, press the ''B#1'' button for the same num-
ber of times as the difference between the desired track and the current track,
When the ''K&@'' button is pressed once, the currrent track is played from the
beginning: afterward, the playback position skips to the previous track every time
the ''é<d'" button is pressed.
STOP [ B J/M.CLEAR button
When this button is pressed during playback or when paused, it is completely
stopped.
When pressing in stop mode, one of the programmed track number will be delet-
ed, as this time the track number which was programmed as the next program
number will be displayed.
PLAY/PAUSE [ c= ] button
When a disc has been inserted, press this button to start playback. Pressing the
button during playback causes it to pause temporarily.
OPEN button
When this button is pressed, the lid is unlocked and opened a little.
Lid
To insert or take out a disc, open the lid by pressing the OPEN button,
DIGITAL OUT jack
Used to connect a digital amplifier or a home audio system with a digital input
terminal.
LINE OUT jack
Used to connect a home audio system (with the provided connection cord), or
a car audio system (with the provided Car Audio Cassette Adaptor),
DC 6V-9V power supply jack
Used to connect the provided AC adaptor. Although a commercially-available car
power adaptor can also be connected here, be very careful of the @/O polarity
of the connector, plug size, the power capacity, etc., for these do not always match
the characteristics of this unit.
PHONES jack
Connect headphones here.
VOLUME control
Turn to adjust the sound volume.
KEY LOCK button
When this button is pressed once during playback, the '' o-'' mark appears on
the display @, and button @ to ® and @ to @ become inoperative, thus preventing
operation mistakes. Pressing the button again releases the lock condition. If this
button is pressed during playback when in a place subject to strong vibrations,
such as in a car, sound skip due to vibrations will be reduced.
@ oPc-77
Publicité
