Publicité
@ Memory playback
Memory play allows the tracks to be played in any desired order.
@ How to program tracks
Programming tracks is possible only when the unitis in stop mode. First, press the STOP
"IB /M.CLEAR button to stop play.
1. Press the MEMORY/M.ALL CLEAR button. The "MEMORY" indicator lights up and
the program number (''1"' at first} will be displayed.
mEHORY
'
t
2. Select the track to be programmed by pressing the "P1"' of 'it
button, (The
following example shows that the 3rd track is programmed.)
aeuonY
eS
i
t
3. Press the REMAINING/M.ENTER button to program the track, The next program num-
ber will be displayed.
seman
2
4. Repeat procedures 2. and 3. to program more tracks. Up to 16 tunes can be
programmed for memory play.
*
During programming, if you wait for an interval of more than about 30 seconds,
the automatic power-off function is activated, and all programmed rnemories will
be cleared. In this case, to program the tracks again, first press the MEMORY/M.ALL.
CLEAR button.
E How to start memory playback
1. Press the PLAY/PAUSE " c=s"' button.
*
During memory playback, skipping tracks, or fast-forwarding in the programmed
order is possible using the F-SKIP "'4"', R-SKIP 'ae', FF em!
or REW 'aa'
button,
*
During memory playback, single track repeat, or all repeat, play is possible within
the programmed tracks by pressing the REPEAT button.
2. To stop memory playback, press the STOP ''' Hl' M.CLEAR button.
Note:
:
When the STOP '' B '/M.CLEAR button is pressed in stop mode, any programmed
tracks will be sequentially cleared, in the order in which they were programmed.
10 oPc-77
Publicité
