Kenwood DPC-77 Mode D'emploi page 11

EB To check the program contents
Set the unit to stop mode.
1. Press the REMAINING/M.ENTER button.
The first programm number and the corresponding track number will be displayed.
Eom
To change the program contents
Set the unit to stop mode.
4. To change another tracks, repeat procedure 1, to 3..
& To delete part of the program
Set the unit to stop mode.
@ To delete the entire program
8 cm single CD can also be played.
This unit can play 8 cm single CDs directly without using an adaptor.
Caution:
opc-77 11