Publicité
Press the F button to select the day you want to program with the same
program you just copied.
Press
selected day. The word PROG appears on the display.
Press the
The procedure ends by pressing the button again after viewing / editing
the last day of the week. The display returns to show the programming
settings for the current day and time.
11. Troubleshooting
•
In the event of overheating, the safety device on the appliance automatically disabled the heating elements. In
this case:
-
Turn off the convector and allow it to cool down for about 15/20 minutes.
-
Eliminate any other possible reasons for overheating (e.g.: obstructions in front of the air inlet/outlet grilles,
build-ups of dirt).
-
Turn on the convector again and check it works correctly.
12. Maintenance
•
This product does not require any special maintenance.
•
Clean the product with a dry cloth once every 6 months.
•
If the product requires repairing, contact an authorised technical service centre.
•
When replacing the power cable, use a 2x0,75mm
ration must be performed by qualified personnel and never by the end user in order to avoid damaging the
appliance and jeopardising personal safety.
13. Legal notice
Environment and recycling
To avoid damages during transport, your device has been carefully packed. To contribute to the protection
of our environment, we ask you to dispose of the packaging materials properly.
Recycling of obsolete appliances
Appliances with this label must not be disposed off with the general waste but they must be collected and
disposed of separately. The disposal of used devices must be carried out with precision, in compliance with
the locally applicable regulations and laws in force.
and
buttons together again to paste the program on the
button to view / edit the following day.
H05RR-F or 2x1,00 mm
2
29
H05RR-F <HAR> type. This ope-
2
Publicité
