Publicité
9. date and time setting
To set the current time and date, proceed as follows:
Keep pressing the
3"
Press the
starts to flash.
Use
and
Press the
Use
and
Press the
ting.
Use
and
Press the
mode.
10. Weekly programming
The weekly programming allows you to set the desired operating mode for each hour of the day and for each day of
the week. The convector is supplied preset with the following weekly program:
Monday - Friday
Saturday - Sunday
button untill the programmed mode is selected.
button for at least 3 seconds until the day of the week
buttons to select the current date.
button to switch between day setting to time setting.
buttons to select the current time.
button to switch between hour setting and minutes set-
buttons to select the current minutes.
button to end the setting and return to the Programmed
27
Publicité
