2. PACKAGING
Your fi rst impression is important to us!
- The packaging for your new fi re provides excellent protection
from damage. However damage to the fi re and accessories can
occur during transport.
Therefore please check your fi re for damage and that all parts
are there on receipt! Report any defects to your fi re dealer im-
mediately! When unpacking please ensure that the soap stone
panels are intact. The material scratches easily. Soap stones are
not covered by the warranty
3. TECHNICAL SPECIFICATION
This is a Design 1 fi re and has a connection for fi tting to a chimney
that is equipped for other fi res and boilers for solid and liquid
fuels, insofar as the chimney dimensions are in accordance with
EN 13384
Technical Specifi cation
Technical Specifi cation
Dimensions (mm) and weights (kg)
Dimensions (mm) and weights (kg)
Height
Width
Depth of the corpus
Weight
Flue pipe outlet diameter
Rated heating capacity as per EN13240
Lowest thermal output
Room heating capacity (m3) dependent
on the house insulation
Fuel fl ow
Effi ciency
CO2 content
CO emission rel. 13% O
Dust emissions
Flue gas values for multiple connection to a chimney as per
DIN 4705,Part 3 or for measuring the chimney as per EN 13384
Flue gas mass fl ow g/s
Abgastemperatur/°C
Minimum fl ow pressure at rated heating capacity
The owner of the small heating system or the authorised person
for the small heating system must keep the technical documen-
tation in a safe place and present it to the local authority or the
chimney sweep.
ENGLISH
-The packaging for your new fi re in the main has no effect on
the environment.
The wood in the packaging has not been surface treated and
can therefore be burned in your fi re. The box and the fi lm (PE)
can be recycled without any problem.
958
516
441
97
130
7 kW
3,5 kW
70 - 190
1,2 kg/h
81,2 %
10,3 %
434 mg/Nm3
25 mg/Nm3
6,2
244
12
17