Publicité
Auto Clean(Optional)
❏ During auto clean function, moistures left in indoor units after cooling operation or healthy dehumidification
operation can be removed.
This function operate when the unit is turned off.
1
Press the FUNCTION SETTING button 1 time.
Auto Clean symbol will blink.
2
Press the SET/CLEAR button to reserve or cancel the Auto Clean function.
If the Auto Clean function is reserved, whenever the unit is turned off, the indoor fan is
still running for about 30 minutes internally without cooling or dehumidification operation.
Also the louver is closed.
This dries up any remains of moisture & cleans the unit internally.
Display Luminosity (Artcool Mirror Type Only)
The Display Luminosity can be adjusted by using the remote control.
Open the door of the remote controller, and press the LCD LUMINOSITY button.
Display will be dark. Press the button again to set bright display.
Because Display Luminosity is optional function, some product will not operate.
Operating Instructions
Owner's Manual 15
Publicité
