Publicité
rent
the
TIG
Relationship between the current and the size of the tungsten electrode.
Diameter of tungsten electrode in
lten
TIG can weld with a rod, and the diameter of the rod is linked to the current when the wire is used.
Welding current in Amperes
ust
the
ring
ous
4.5 Welding procedure
ues
weld
a)
Wear personal protective equipment appropriate to the work to be carried out and in accordance with current
directives.
b)
Refer to Chapter 3, connect the power cable, gas, TIG torch or electrode holder, earth and switch on.
ime
-
MMA welding with a coated electrode
the
•
gas
•
•
•
-
TIG welding
•
•
ent.
•
•
Notices_multilangues_220DC.indd 25
Notices_multilangues_220DC.indd 25
3
4 - 5
6 - 12
mm
1,0
1,6
2,0
2,4
10 - 20
20 - 50
50 - 00
100 - 200
Select the MMA mode using button 4.
Adjust the intensity to suit the electrode by pressing and turning the handwheel 3 (see table in section 4.4
for settings).
Press the steering wheel again to confirm the setting.
The machine is ready to weld.
Select the welding mode using button 4: TIG or lift TIG.
Select the options using buttons 5 and 6.
Adjust the TIG parameters by pressing and turning handwheel 3. Press wheel 3 to confirm and move on
to the next setting.
The machine is ready to weld.
3,2
100 - 130
3,2
100 - 130
4,0
160 - 180
4,0
160 - 180
DC output in Amperes
10 - 75A
40 - 130A
75 - 180A
130 - 220A
Rod diameter in mm
≥1.0
1,0 - 1,6
1,0 - 2,4
1,6 - 3,0
25
18/03/2024 13:27:01
18/03/2024 13:27:01
Publicité
