Publicité
b)
2.2.3 Major risks associated with light
a)
b)
e. If
ety.
be
2.2.4 Risk of splashing
a)
b)
the
use
2.2.5 Other precautions
a)
ock!
b)
c)
d)
e)
nets
2.3 After welding
2.3.1 Beware of high temperatures
2.3.2 Storage
ed.
a)
ng-
b)
2.3.3 Conservation
are
a)
Notices_multilangues_220DC.indd 19
Notices_multilangues_220DC.indd 19
should be taken to ensure that there are no high-frequency-sensitive instruments or equipment in the vicinity.
If people with pacemakers are in the vicinity, the welding unit should be used with caution. In this case, we
recommend using the Lift mode.
Please wear a welding bonnet that complies with current directives. The welding machine produces strong
light which can cause loss of vision. The shade must correspond to the work intensity (see table below).
Strong light can cause dizziness. Working at height can be hazardous. Make sure you take appropriate
protective measures.
Welding process
Coated electrodes
TIG on all metals
Plasma cutting
Wear protective clothing in accordance with current directives. Projections generated during welding are very
hot and can cause burns to the human body.
There must be no flammable or explosive substances in the workplace. Projections may cause a fire or
explosion.
Carefully check the argon gas cylinder and gas connection for leaks.
The no-load voltage of the device is high and any physical contact could be life-threatening. Do not touch the
plug directly.
Do not leave the appliance while it is in operation. If you stop working, make sure the machine is switched off,
otherwise there is a risk of electrocution.
It is not recommended to use a longer extension lead for welding. If you must use a longer extension cord, it
is preferable to use a larger diameter wire (2.5 mm² minimum), and to unwind the extension cord completely.
Do not touch any part of the workpiece or welding equipment during the operation.
The welded part, the welding rod and the welding torch after welding are at a very high temperature and must
not be touched directly, otherwise they may burn.
Once the work has been completed, the machine must be switched off immediately.
Once the machine has cooled down completely, start putting the equipment away. First turn off the electricity
and gas.
Keep the device in a dry, dust-free place.
Current in Amperes
0,5
2,5
10
20
40
80
1
5
15
30
60
100
9
10
9
10
11
9
10
125
175
225
275
150
200
250
11
12
12
13
11
12
18/03/2024 13:26:58
18/03/2024 13:26:58
19
Publicité
