Publicité
8
USING THE SYSTEM
The video of the baby unit will be displayed
on the screen of the parent unit when both
are switched on. The icons on the screen are
explained below.
1. Signal indicator
indicator shows the strength of the
connection between units. No bars
indicate a poor signal and 4 bars
indicate the strongest signal (see table).
2. Camera indication Shows which
camera is currently active.
3. Temperature indicator Displays the
room temperature measured by the
baby unit.
4. Lullaby indicator Indicates which
lullaby is playing.
5. VOX indicator Appears when the VOX-
mode is activated.
6. ZOOM indicator Displays the zoom
level (1x, 2x or 3x)
7. Battery indicator
battery life of the parent unit.
8. Zoom position Displays the position of the
magni cation in zoom levels 2x and 3x. Use
the arrow keys to move the image. When the camera is in zoom 2x and 3x mode
9. 'Talk'-indicator Appears when the talk button is pressed. You can now talk through the baby unit.
10. Date and time indicator Displays the current date and time (HH:MM AM/PM DD/MM).
OUT OF RANGE
When the baby unit is positioned too far away
from the parent unit, the message "Connecting... " will
appear on the screen of the parent
unit and the video will start to icker. When
there is no connection between the baby and
the parent unit, the screen of the parent unit will
be black and display the message "Connecting... "
N
: If moving the baby and parent unit
OTE
closer together does not help, try pairing the
baby and parent unit. See Pairing chapter.
The signal
Indicates the
1
2
3
3
8
9
10
Signal strength
Indicator Warning
Perfect
Good
Fair
Low
No Signal
4
3
5
3
6
3
7
None
None
None
Out of Range
Out of Range
Publicité
