Publicité
6
6. GETTING STARTED
INSTALLING THE PARENT UNIT MONITOR
1.
Carefully unpack the parent unit (monitor).
2.
Connect the power adapter to the parent unit and power socket. The parent unit will start charging; the
indication LED will now light up (blue). During rst use, please allow the unit to completely charge to
ensure optimal battery capacity.
: C
NOTE
HARGE THE PARENT UNIT COMPLETELY BEFORE FIRST USE
3.
Push the power button up to switch the monitor on. The screen will now show the Luvion introduction
screen.
INSTALLING THE BABY UNIT CAMERA
Before you install the baby unit (camera), carefully plan where and how you want to position it. Make sure
that you take in account the length of the power cable and the position of the power socket, because the
baby unit (camera) needs to be connected to the power grid.
1.
Carefully unpack the baby unit (camera).
2.
Place the baby unit in the preferred position. You can place the baby unit on a table/cabinet, or you can
mount it on a wall.
.
Publicité
