Télécharger Imprimer la page

Royal Sovereign ARP-2410 Mode D'emploi page 3

Publicité

ABOUT THE UNIT
This unit uses R32 refrigerant. R32 has no damaging influence on the ozone layer (ODP), a negligible greenhouse effect
(GWP) and is available worldwide. Because of its efficient energy properties, R32 is highly suitable as a coolant for this
application. Special precautions must be taken into consideration due to the coolant's high flammability.
SAFETY INSTRUCTIONS
When using this unit follow these safety precautions to reduce risk of fire, electric shock, or injury.
ELECTRICAL SAFETY
1. For your safety, this unit should be properly grounded on a level surface indoors.
2. The unit should be placed near an electrical outlet so that the outlet is easily accessible.
3. Make sure the voltage meets the unit's electricity requirements (115-120V/60Hz).
4. Do not connect this machine to an outlet having the electrical ratings below or above this machine.
5. In case of any abnormality, be sure to turn off the machine, disconnect the plug, and contact Royal
Sovereign Customer Service.
6. Do not operate if the electrical plug or power cord is damaged. If damaged, call Royal Sovereign Customer
Service for repair/replacement.
7. Do not under any circumstances alter the electric plug.
8. Do not place heavy items on the plug or cord.
9. Do not plug this cord into a loose electrical outlet.
10. Only plug the unit into a properly installed, grounded 3 prong outlet.
11. If the electrical outlet you intend to use is not adequately grounded or protected by a time delay fuse or
circuit breaker, you should have a qualified electrician install the proper outlet.
12. Do not share the electrical socket with other appliances.
13. Do not use an adapter plug or extension cord with this unit.
14. Never attempt to turn off this machine by disconnecting the plug.
15. When plugging or unplugging, keep your hands dry.
16. Always grasp the plug when plugging or unplugging the unit. Never unplug by pulling on the cord.
17. Do not pull on the power cord while moving the unit.
18. This unit uses a plug with a built-in fuse. Conduct a Power Plug Check before use to confirm normal
operation.
19. Turn the unit off and unplug when: cleaning the unit, removing the filters, or not using the unit for an
extended time period.
Read and Fully Understand this Owners Manual before using or operating the unit
WARNING
-3
-
ARP-2410

Publicité

loading