Viscount Ouverture Guide De L'utilisateur page 8

Viscount Ouverture
1. PEDAL Section.
Contains the pedal's stops of the pedal board.
2. MAN.I Section.
Stops for Manual I.
3. MAN.II Section.
Contains the stops of Manual II.
4. MAN.III Section.
Manual III stops.
5. POWER Switch.
Instrument on/off switch.
6. Coupler controls.
These stops and toe-pistons control the couplers of manuals and pedalboard.
7. ORCHESTRA Section.
This section contains the organ's Orchestra stops.
8. Tremulant pistons.
Here are the tremulant pistons of each section and the one dedicated to the register Vox Humana.
9. Sub- and super-octave.
These draw-knobs activate the sub and super octave of the Man.III, and the 16' couplers of the Man.III
with the other organ manuals.
10. Additional displays.
- [CRESCENDO] shows the step currently reached by the [CRESCENDO] pedal (point 17)
- [M. BANK] displays the memory bank of the combinations (general and customised) selected using
the [MEM. BANK +] and [MEM. BANK -] pistons (point 14).
11. [S] Piston.
Fixing piston for saving the combinations, the Tutti and the Crescendo steps.
To set a combination or the Tutti, after setting the voices as required, press [S], hold it down and then
press the piston of the combinations you wish to save.
To save a Crescendo step, select it using the pedal of the same name, press [S], hold it down and press the
[HR] of the general memories. To copy the contents of one step into another, select the step you wish to
copy, hold down the [S] piston, select the step into which you wish to copy the contents, then press the
[HR] of the general memories.
NOTE
If the LED of the [S] piston is off, programming of the organ is locked out by the Lock Organ
function (chapt. 10), so it will not be possible to save combinations and/or view internal programming
functions.
12. MIDI Section
These controls, provided for each manual and the pedal board, allow transmission of the note MIDI
codes on the MIDI [OUT] port to be enabled and disabled. All the instrument's other MIDI messages
will continue to be transmitted, even with the MIDI control off.
6
User Guide