SF 0440
angle while holding the rear grill handle. Do not force the read. Re-tighten
the tilt knob when the desired angle is found.
The fan‟s direction can be adjusted relative to the base by loosening the
thumb screw at the bottom of the motor, assembly, and rotating the fan head.
To set the fan into oscillation, depress the oscillation knob on the top of
the motor assembly. The fan head will pivot side to side and up and down. For
stationary operation, pull up on the oscillation knob.
CARE, CLEANING & STORAGE
The fan blade and grill set should be cleaned regularly for most efficient
operation. Unplug the fan, then reserve the assembly procedure to remove
those parts from the motor assembly before cleaning. Wipe with a damp cloth
then towel dry.
Never immerse any fan components in water. Wipe the fan only with a dry or
slightly moist cloth, then immediately towel dry.
Always store the fan in a cool dry location.
Disposal of old electrical appliances.
The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances
must not be disposed of in the normal unsorted municipal waste stream.
Old appliances must be collected separately in order to optimize the
recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your
obligation, that when you dispose of the appliance, it must be separately
collected.
Consumers should contact their local authority or retailer for information
concerning the correct disposal of their old appliance.
DECLARATION OF CONFORMITY:
This device complies with the requirements of the Low Voltage Directive
2014/35/EU and the requirements of the EMC directive 2014/30/EU.
11