Dometic DM20D Instructions De Montage Et De Service page 20

Operation
Drilling the holes (fig. a, page 8)
1. Drill a hole with a diameter of 25 mm (0.98 in.) through the decor and the door
(A 1).
2. Unscrew the screws (B 1) of the decor frame (B 2).
3. Remove the decor frame (B 2).
Assembling the lock (fig. b, page 9)
1. Put the new lock cover (A 1) into place.
2. Put the decor (B 1) into the decor frame (B 3).
3. Screw the decor frame (B 3) onto the door (B 2).
4. Install the door lock (C 1).
5. Install the lock catch in the cabinet (D 1).
Assembling the drawer (fig. c, page 9)
1. Push the gasket (1) on the decor frame (2).
2. Screw the door handle (4) onto the door.
3. Push the plugs (3) on the screws of the door handle (4).
4. Push the drawer into the cabinet.
7 Operation
A
NOTICE! Damage hazard
The lamp can only be replaced by the manufacturer, a service agent or
similarly qualified person to avoid hazard.
7.1 Saving energy
• Only open the minibar as often and for as long as necessary.
• Avoid unnecessarily low temperature settings.
• For optimal energy consumption, position the shelves and drawers according to
their position on delivery.
• On a regularly basis, make sure the door seal still fits properly.
• Clean dust and dirt from the condenser at regular intervals.
20
DM20
EN