Publicité
8/10/22, 10:32 AM
Scale and Offset Wizard
For each VisiJet M2 material, the "General" build styles in 3D Sprint are designed to give you accurate prints right out of the box. Please use the
"General" build style rst and foremost to achieve part accuracy. However, if after measuring your parts you nd that you have issues achieving
accuracy, you may use the "Scale and Offset Wizard" in 3D Sprint to troubleshoot such issues.
Each ProJet MJP 2500 printer will vary slightly in accuracy. If you have multiple printers, you may need to set the accuracy for each one
separately. To do this, click the "Printer" icon in the upper left corner, connect to a speci c printer, and run the steps in this section for each
printer. Additionally, you will need to run the wizard for each Material,Print Mode, and Build Style combination you use.
1. Click the
"Load
Reference" button to load the accuracy models that will be printed.
2. Print the reference build on your ProJet MJP 2500, then post process the parts.
3. Click the
"Printer
Tools" button, then select the
4. In the
"Printer
Settings" window, select the build style you used to print the reference build, then select the
5. Measure each part using calipers, micrometer, or height gauge, then input the measurement values to corresponding boxes in the
Wizard". Each measurement is repeated 4 times. Be sure to input the values for parts labeled with X, Y, and Z before selecting the "Next" button.
NOTE: Before measuring, wipe each end of the measurement part with a paper towel to remove excess wax remaining after post processing.
Also be sure to wipe clean your measurement device before measuring.
fr.infocenter.3dsystems.com/projetmjp2500/print/book/export/html/321
Guide de l'utilisateur
"Printer
Settings" button.
"Scale and Offset
Wizard" button.
"Scale and Offset
32/100
Publicité
