Publicité
Using the Zoneline
To Remove the Room Front
Additional controls are located behind the room cover.
Warning: Do not remove room front. Room front is only
to be removed for installation or if servicing.
To remove:
Air Direction
Ventilation Control*
NOTE:
the back of this manual.
position of the lever can be adjusted with the wing nut.
When set at the closed position, only the air inside the
room is circulated and filtered.
When set in an open position, some outdoor air will be
cooling efficiency.
Energy Tip: Keep the vent control in the closed position
to prevent unconditioned air from entering the room.
49-5001038 Rev. 1
To replace: Align and place the top rail of the room
Remove the
shipping screws
Control
7
Publicité
