Publicité
Installation Instructions
INSTALLING THE ZONELINE (cont.)
3. INSTALL THE UNIT INTO
THE WALL SLEEVE
Slide the unit into the wall sleeve and secure with
four screws through the unit flange holes.
sits under the control panel, sitting in the pocket in
the base pan.
to the pocket in front of the control box.
NOTE:
flanges for installation in wall sleeves other than GE
the installer should use an awl or other sharp tool
to puncture the insulation in the appropriate holes
before installing the attachment screws.
4. CONNECT POWER
CORD OR DIRECT
CONNECT KIT
Review installation instructions provided with
power cord or direct connect kits for detailed
assembly instructions.
Power supply kit
(Appearance may vary)
5. REPLACE THE ROOM
FRONT
Reinstall the room cover by aligning and placing the
49-5001038 Rev. 1
Publicité
