Publicité
O
C
VEN
OOKING
Control Panel
A B C D
The control panel is designed for ease in programming. The display window shows options for each function and moves from step
to step through the programming process. Control panel features and style varies by model. Oven display above is programmed for
a bake operation.
A
Rapid Preheat
Use to decrease preheating time.
B
Convect
Use for convection baking and roasting.
C
Bake
Use for baking and roasting.
D
Broil
Use for broiling and top browning.
E
TIMER 1
Sets timer.
F
Display
Displays oven functions, options and
window time of day.
G
TIMER 2
Sets timer.
H
Number Pads
Use to enter time and temperature,
or to enter Favorites names.
I
Favorites
Use to access, program or save
baking cycles.
J
More Options
Use to access additional features.
K
Clean
Use to set self-clean cycle.
L
Setup
Use to view or change factory
default settings.
M Oven Light
Use to turn the oven light on or off.
N
CANCEL
Cancels all operations except TIMER,
Clock, Favorites, and Setup.
O
Quickset pads
Use to select options in display
window (next to display window
on both sides).
Quickset Pads
Quickset pads are located on each side of the display window
and are used to select the desired function or option in the
display window. To select the option or function, press the
Quickset pad next to the word.
All manuals and user guides at all-guides.com
E
I J K L
F
G
M
N
O
If you need to back out of a function or option in the display,
press the Back pad. When your programming is complete,
press the Enter pad or wait four seconds and the function will
start automatically.
Up arrows indicate additional screens with additional options.
Press the Quickset pads next to the arrows to scroll through
the display.
Important: Four seconds after entering the function,
option, number or letter, the function will automatically be
entered. If more than 30 seconds elapse between steps in
programming, the function will be canceled and the
display will return to the previous display.
Clock
Setting the Clock:
1. Press the Setup pad.
2. Select CLOCK using the Quickset pads.
3. Select TIME.
4. Enter the time using the number pads.
5. Press Enter pad.
6. Select AM or PM in 12 hour mode. (For 24 hour clock, see
below.)
7. To exit the Setup mode, press Setup pad.
13
H
Cont.
Publicité
