Jenn-Air JED8230 Guide De L'utilisateur page 3

Only certain types of glass, glass/ceramic,
ceramic, earthenware, or other glazed
utensils are suitable for cooktop service
without breaking due to the sudden
change in temperature. Follow utensil
manufacturer's instructions when using
glass.
Turn pan handle toward center of cooktop,
not out into the room or over another
surface element. This reduces the risk of
burns, ignition of flammable materials, or
spillage if pan is accidently bumped or
reached by small children.
Make sure drip bowls (select models) are
in place. Absence of these bowls during
cooking may subject wiring or components
underneath to damage.
Protective liners – Do not use aluminum foil
to line surface unit drip bowls. Improper
installation of these liners may result in a
risk of electric shock or fire.
G -C
LASS ERAMIC
C
OOKTOP
NEVER cook on broken cooktop. If cooktop
should break, cleaning solutions and
spillovers may penetrate the broken
cooktop and create a risk of electric shock.
Contact a qualified technician immediately.
Clean cooktop with caution. Some cleaners
can produce noxious fumes if applied to a
hot surface. If a wet sponge, cloth, or paper
S T
AVE
D
I
UCTING
Jenn-Air's ventilation system is designed
to capture both cooking fumes and smoke
from the cooktop surface. If the system
does not, these are some ducting installa-
tion situations to check:
• 6" diameter round or 3
rectangular ducting should be used for
duct lengths 10'-60'. Note: 5"
diameter round ducting may be
used if the duct length is 10' or
less.
All manuals and user guides at all-guides.com
towel is used on a hot cooking area, be
careful to avoid steam burn.
D
EEP
Use extreme caution when moving the
grease pan or disposing of hot grease.
Allow grease to cool before attempting to
move pan.
H
EATING
NEVER touch surface elements or
areas near elements.
Heating elements may be hot even though
they are dark in color. Areas near surface
elements may become hot enough to
cause burns.
During and after use, do not touch or let
clothing or other flammable materials
contact heating elements or areas near
elements until they have had sufficient
time to cool.
Do not soak removeable heating elements.
Heating elements should never be im-
mersed in water.
Other potentially hot surfaces include:
Cooktop and areas facing the cooktop.
C
HILD
NEVER leave children alone or unsuper-
vised in area where appliance is in use or
is still hot.
I
HESE NSTRUCTIONS FOR
NFORMATION
• No more than three 90° elbows should
be used. Distance between elbows
should be at least 18".
• Recommended Jenn-Air wall cap
MUST be used. Make sure damper
1 moves freely when ventilation system is
/ " x 10"
4
operating.
• There should be a minimum clearance
of 6" for cooktop installed near a side
wall.
F F
AT RYERS
E
LEMENTS
S
AFETY
F
2
NEVER allow children to sit or stand on
any part of the appliance as they could
be injured or burned.
CAUTION: NEVER store items of interest
to children in cabinets above an appli-
ance or on backguard of a cooktop.
Children climbing on appliance to reach
items could damage the appliance or be
burned or seriously injured.
Children must be taught that the appli-
ance and utensils in or on it can be hot.
Let hot utensils cool in a safe place, out
of reach of small children. Children
should be taught that an appliance is not
a toy. Children should not be allowed to
play with controls or other parts of the
unit.
I
MPORTANT
N
OTICE AND
IMPORTANT NOTICE
REGARDING PET BIRDS: Never keep
pet birds in the kitchen or in rooms
where the fumes from the kitchen could
reach. Birds have a very sensitive respira-
tory system. Fumes released during an
oven self-cleaning cycle may be harmful
or fatal to birds. Fumes released due to
overheated cooking oil, fat, margarine
and overheated non-stick cookware may
be equally harmful.
R
UTURE EFERENCE
If there is not an obvious improper
installation, there may be a concealed
problem such as a pinched joint, obstruc-
tion in the pipe, etc. Installation is the
responsibility of the installer
and questions should be
addressed first by the
installer. The installer
should very carefully check
the ducting installation
instructions.
• Use the Flow Tester Card
S
AFETY
W
ARNING