Publicité
EN
3. Getting Started
3.1 Powering the Baby Unit (Camera)
•
Connect the Camera Power Adapter to the DC-Jack (26) on the back bottom of the Baby Unit.
•
Plug the AC power adapter into the wall outlet.
•
Ensure the ON/OFF switch (25) is in the ON position.
•
The unit will power on automatically and the green power LED (3) will light up.
Use the ON/OFF switch (25) to turn the Baby Unit off.
•
NOTE: Only use the AC power adapter included in this package.
3.2 Powering the Parent Unit
•
The adapter should not be exposed to direct heat sources such as a candle, stove, radiator, heat register or other appliance that emit heat.
Connect the Parent Unit Power Adapter to the DC-Jack (16) on the right side of the Parent Unit.
•
•
Plug the AC power adapter into the wall outlet.
•
Press and hold the Power button (1) on the top left side of the Parent Unit for 2 seconds to turn the unit on.
•
Once the Parent Unit is turned on, the green power LED (3) will light up and "Babysense Video" logo will display on the LCD.
•
Press and hold the Power button (1) on the top left side of the Parent Unit for 5 seconds to turn the unit off.
NOTE: Only use the AC power adapter included in this package.
NOTE: The Parent Unit is supplied with a built-in rechargeable Li-ion battery (3.7V 4000mAh).
We recommend whenever possible, keep the Parent Unit plugged in to keep the battery charged.
3.3 Charging the Parent Unit
Connect the power adapter to the DC-Jack (16) on the right side of the Parent Unit.
•
•
Plug the AC power adapter into the wall outlet.
•
Charging LED (2) on the Parent Unit will light up in RED to indicate charging.
•
When the unit is turned on, the battery charging icon (changing bars) will appear at the top right corner of the LCD screen.
•
Full battery indicator (4 fixed bars) will appear at the top right corner of the LCD screen, indicating the battery is fully charged. The charging
8
Publicité
