Publicité
4.6 Temperature Scale Setting
The temperature reading from the temperature sensor (24) at the back of the Baby Unit will be displayed on the top of the screen. To switch
between °F (Fahrenheit) and °C (Celsius) follow the below instructions:
1. Press to access the menu, choose
2. Press °F / °C and press
3. Navigate with
4. Press
button to confirm
5. Press to exit the menu
NOTE: The monitor features a built-in automatic temperature alert. The monitor will alert
(visual indication) when the temperature in baby's room is too high (90°F and higher) or too
low (55°F and lower).
NOTE: Make sure the temperature sensor is not positioned too close to the camera body as it may affect the correct temperature reading. It is
recommended to stretch out the sensor, so it is as far away from the camera body as possible. Also, it is recommended to place the camera
in an area where there is good air circulation and not in a closed cornered area where the temperature tends to be higher.
4.7 Temperature Alert Setting
This function is to alert if the temperature in baby's room is too low or too high.
Default setting is: <15 °C/59 °F and >31 °C/89 °F.
To change the temperature alert levels, please follow the below instructions:
1. Press to access the menu, choose
2. Press
and press
3. Navigate with
4. Press to exit the menu
and press
to select the desire scale
and press
to select the desire option
EN
13
Publicité
