Télécharger Imprimer la page

BabySense HD S2 Guide De L'utilisateur page 12

Publicité

EN
4.4 Pairing the Baby Unit (Camera) with the Parent Unit
The Baby Unit is paired to the Parent Unit when supplied. There is no need to pair the units again unless the Baby Unit loses its link with the
Parent Unit. To renew the pairing of your units or pair a new/additional Baby Unit, follow the procedure below If unsuccessful, please repeat
the pairing process:
NOTE: Before you begin pairing, make sure to have the Baby and Parent Units side by side and turned on.
1. Press to access the menu, choose
2. Navigate with
3. Press and hold the Pair Button at the back of
the camera until the pairing process is complete
4. Press to exit the menu
4.5 Deleting the Baby Unit (Camera)
1. Press
to access the menu, choose
2. Navigate with
3. Press
to exit the menu
12
and press
to select the camera you want to pair
and press
to select the camera you want to delete

Publicité

loading

Produits Connexes pour BabySense HD S2