Publicité
EN
1. Press to access the menu, choose
2. Press the lullaby you want to play.
3. Navigate with
to select the desire duration and music volume
4. In order to stop the lullaby playback, select
5. Press to exit the menu
NOTE: Once the lullaby function is turned on, the lullaby icon will be displayed on top of the LCD screen.
The lullaby default setting is OFF.
When selecting the loop mode only the 5 melodies are played; the White Noise is excluded.
4.2 VOX Mode
When using the VOX function, the sound and video transmission will stop (standby mode) if the Baby Unit does not register any sound within
30 seconds.
While in standby mode, the LCD screen turns off. Once the Baby Unit registers a sound, louder than the set sensitivity level, it will automatically
start transmitting the signal (sound and video) to the Parent Unit and the LCD screen will turn on.
NOTE: VOX default setting is OFF.
When VOX Mode is active, sound detected from either camera will wake the display and show the respective camera.
10
and press
Publicité
