Publicité
-
End of the timer time
When the time set on the timer runs out, the timed cooking zone turns off, the timer display
and the timed cooking zone LED dot start flashing and a timer alarm beep sounds for one
minute.
The user can cancel the timer alarm at any time by pressing any key on the touch control.
-
Turning off the timer
To cancel the timer operation, select the cooking zone and using the – timer key until "00" is
reached or by pressing the + and - timer keys at the same time.
-
More than one programmed hotplate
When more than one hotplate is programmed, the timer displays will show which timer will
elapse first. The timer LED on the active hotplate will flash.
Mute function
The mute function disables the tone/sound for some functions or actions.
To activate Mute:
-
The hob must be turned off and unlocked.
-
Press the Stop&Go key for 3 seconds. Until you hear 2 beeps and the MUTE sound is activated.
-
When MUTE is activated, the beeps will be muted except for timer end, general ON/OFF and
the error display.
To deactivate Mute:
-
The hob must be turned off and unlocked.
-
Press the Stop&Go key for 3 seconds. Until you hear 2 beeps and the MUTE sound is turned
off.
Pan detection
If you select a cooking zone without placing a container or if it is smaller than the minimum
detectable by the inductor, it will be indicated with the LED.
Residual heat indicator
After using the plate, there is still some residual heat. The control panel continues to display
and warns of the heat emitted. It switches off when the cooking zone has cooled down. To save
energy, use the hotplate to continue cooking.
17
Publicité
