Publicité
Maintenance
Mopping Pad
Replace the Mopping Pad
Remove the dirty Mopping Pad from WINBOT and place a clean new
one on it. Then, press the Mopping Pad with your hands to help it
stick firmly. Please make sure the Mopping Pad is correctly attached,
and do not cover the Spherical Sensors.
* Clean the Velcro at the bottom of WINBOT with a clean brush if it is
dirty. Do not wash with water to avoid damage caused by water.
Wide Side
Narrow Side
Wide Side
Narrow Side
Wash the Mopping Pad
Remove the Mopping Pad. Wash it with tap water, and wring it dry
before use.
Note: Wash with tap water.
Washing the Mopping Pad regularly can extend its service life.
If the Mopping Pad becomes worn or no longer fits exactly within the fastener
area, replace it with a new one to achieve optimal cleaning performance.
Explore more accessories at ECOVACS HOME App or at
https://www.ecovacs.com/global.
21
JA E N
Publicité
