Publicité
Preparations
1.Learn about Station and Status Indicator Lights
Buttons
Short Press
Long Press
Pause/Continue
Turn ON/OFF
Short Press
Short Press
Auto reeling
Switch modes
Battery Indicator
When WINBOT is working:
long press
to make WINBOT return to its original position;
hold down
, then press
to release Station's bottom
suction cup
Status Indicator Lights
Status
Start WINBOT with a normal battery level.
Start WINBOT in low battery state.
Start WINBOT with hardware malfunction.
Start WINBOT in charging mode.
Standby with low battery.
Turn OFF WINBOT with a normal battery level.
Turn OFF WINBOT in low battery state.
Turn OFF WINBOT with hardware malfunction.
Hardware Malfunction
WINBOT is not working and Station has sufficient battery.
WINBOT is not working and Station has low battery.
WINBOT is not working and Station is charging.
WINBOT is not working and charging is completed.
Open Front Cover
Indicator Light on
Power Indicator
WINBOT
on Station
Flashes RED
Flashes RED
Solid BLUE
Flashes RED
Goes out from flashing
RED
Goes out from flashing RED
Flashes RED
Light Effect
Realing In Indicator
Mode Switching
on Station
Indicator on Station
Solid BLUE
Solid BLUE
Solid BLUE
Goes out from solid BLUE
Goes out from solid BLUE
/
/
/
/
Battery Indicator
Solid RED (one bar)
Solid BLUE
Slowly flashes BLUE
Solid RED (one bar)
Goes out from solid RED (1 bar)
Goes out from solid BLUE
Solid BLUE
Solid BLUE
Solid RED (one bar)
Slowly flashes BLUE
Solid BLUE (5 bars)
9
JA E N
Publicité
