Publicité
4.
Maintenance during Cleaning
For heavily stained glass, please wash or replace the Mopping Pad several times and clean the
four Spherical Sensors in time.
5. Finish Operation
Finish Operation During the Cleaning Process
1. Press and hold the Reeling In Button on the Station for 2 seconds or more, then
WINBOT will immediately halt its current task, return to its original position, and wait to
be removed.
2. Press and hold the START Button on WINBOT for 2 seconds or more to stop the fan.
Then, remove WINBOT according to voice prompts.
Finish Operation When Cleaning Task is Completed
After finishing the cleaning task, WINBOT will automatically return to its original position,
and wait to be removed.
Press and hold the START Button on WINBOT for 2 seconds or more to stop the fan. Then,
remove WINBOT according to voice prompts.
When removing WINBOT, firmly grasp its handle to prevent it from falling.
17
JA E N
Publicité
