Publicité
Start Cleaning
1. Start Cleaning
Make sure Station and WINBOT is turned on.
1. Press and hold START button on WINBOT for 2 seconds to start the fan.
2. Place WINBOT's bottom close to the glass. WINBOT will automatically attach itself and
start cleaning.
Notes:
* When Station is charging, fan cannot be started. Use WINBOT after Station is fully charged
and the power plug is unplugged.
* Do not place WINBOT too close to the edge of the window. It is recommended to keep a
distance of at least 10cm from the edge of the window.
* WINBOT is only suitable for flat surfaces without gaps.
* After the fan is started, do not bring small objects such as hair close to the fan to prevent
them from being sucked in and blocking the fan.
2. Switch Modes
When WINBOT is working, you can switch cleaning modes by pressing Mode Switching
Button on the Station. After switching modes, WINBOT will start the new cleaning mode
immediately.
Note:
* Press Mode Switching Button to switch between Deep Mode, Quick Mode, and Edge Mode
in sequence. To learn and use more modes, refer to ECOVACS HOME App.
16
EN
JA
3. Pause Operation and Move Station
Pause
If you need to pause WINBOT's current operation, press the Power Button on the Station.
WINBOT will immediately pause its work and stop moving. Press the Power Button on the
Station again, and WINBOT will resume and continue the unfinished cleaning task.
Move Station:
If you wish to move the Station during the cleaning process:
1. Press and hold the Power Button on the Station, and then press the Mode Switching
Button (short or long press). WINBOT will pause its work, and the Station's suction cup will
automatically release its grip.
2. Move Station to the new location as needed, ensuring that it is placed on a flat and
smooth surface.
3. Press the Power Button on the Station again, Station's suction cup will automatically
attach, and WINBOT will resume and continue the unfinished cleaning task.
2
Note:
* After Station's suction cup releases its grip, if there is no button operation within one
minute, the suction cup will automatically attach to prevent Station from accidentally
tipping over.
Publicité
