Publicité
EN
6.8
SHARPEN THE BRUSH CUTTER BLADE
MAKE SURE TO DISCARD A BRUSH CUTTER
BLADE THAT IS DAMAGED. ATTEMPTING TO
MANUALLY STRAIGHTEN, BEND, OR TWIST A
BLADE CAN BE DANGEROUS AND SHOULD BE
AVOIDED.
1.
Place the brush cutter blade on a workbench.
Clean off any dirt and debris.
2.
Hold the brush cutter blade on the edge of the
bench with the angled portion of the blade facing
out.
3.
Drag a single-cut file across the blade at the
same angle as the blade edge, until all six edges
are the same sharpness.
Note: It is important to sharpen all edges equally in
order to optimize balance and cutting performance.
6.9
SHARPEN THE BRUSH SAW BLADE
MAKE SURE TO DISCARD A BRUSH SAW
BLADE THAT IS DAMAGED. ATTEMPTING TO
MANUALLY STRAIGHTEN, BEND, OR TWIST A
BLADE CAN BE DANGEROUS AND SHOULD BE
AVOIDED.
Note: If the blade is significantly worn, first sharpen
the edges of the teeth with a flat file. Proceed to
sharpen with a round file as described below.
1.
Place the brush saw blade on a workbench.
Clean off any dirt and debris.
2.
Use a round file with a file holder.
3.
Maintain the file at a 15° angle.
4.
Sharpen one tooth at a time until all teeth are
equally sharp.
Note: Ensure uniform sharpening of all edges to
optimize balance and cutting performance.
WARNING
WARNING
English
7
TRANSPORTATION, STORAGE, AND
DISPOSAL
7.1
TRANSPORTATION AND STORAGE
• Follow special packaging and labeling requirements
for commercial transportation, including by third
parties and forwarding agents.
• Seek advice from a person with special training in
dangerous materials before shipping the product
and comply with all applicable national regulations.
• Use tape on open contacts when packaging the
battery and ensure it is securely packed to prevent
movement.
• Remove the battery before storing or transporting
the product.
• Store the battery and battery charger in a dry,
moisture-free, and frost-free space.
• Avoid storing the battery in an area where static
electricity may occur, and do not store in a metal
box.
• Charge the battery 50% before long-term storage.
• Store the battery charger in a closed and dry space.
• Keep the battery away from the battery charger
during storage, and ensure that unauthorized
persons, including children, do not touch the
equipment. Store the equipment in a lockable
space.
• Clean the product and perform full servicing before
long-term storage.
• Use transportation guards on the product to prevent
injury or damage during transportation and storage.
• Securely stow the product during transport to ensure
safe handling.
7.2
DISPOSAL OF THE BATTERY, BATTERY
CHARGER, AND PRODUCT
Symbols on the product or the package of the product
mean that the product is not domestic waste. Recycle
it at a recycling station for electrical and electronic
equipment. This helps to prevent damage to the
environment and persons.
Get in touch with your local authorities, domestic waste
service, or your dealer for more information about how
to recycle your product.
22
Publicité
