Publicité
EN
DO NOT KEEP YOUR FINGER ON THE TRIGGER
WHEN YOU MOVE THE PRODUCT TO PREVENT
ACCIDENTAL START.
5.3
OPERATE THE PRODUCT
5.3.1
AUTOMATIC SHUTDOWN SAFETY
FUNCTION
The product has an automatic shutdown function that
stops the product if it is not used. The speed indicator
turns off and the product stops after a few seconds of
inactivity.
5.3.2
SWITCH THE OPERATION DIRECTION OF
THE TRIMMER HEAD
The trimmer head automatically rotates in a
counterclockwise direction when the product is turned
on. Use the reverse button to change the operation
direction of the trimmer head.
1.
Release the trigger. Ensure the power remains
on.
2.
Push and hold the reverse button for 2 seconds
until the reverse indicator light turns on.
3.
Start the product as usual. The trimmer head will
rotate in a clockwise direction.
4.
The reverse mode will last for 10 seconds then
automatically reset to the default mode even with
the trigger engaged.
5.
If needed, repeat the steps above to initiate the
reverse mode again.
WARNING
English
Note: The product will also reset to the default mode
when you release the trigger and/or after the reverse
mode is turned off.
5.3.3
ADJUST THE SPEED
The product defaults to high-speed mode every time
you turn on the product. To adjust the speed based
on the grass conditions, push the speed button (1).
Speed adjustments can be made at any time during
operation.
Speed indicator (2)
1.
One bar: low-speed.
2.
Two bars: medium-speed.
3.
Three bars: high-speed.
5.3.4
ADJUST THE LENGTH OF THE CUTTING
LINE
When the cutting line becomes short during operation,
bump the trimmer head on a hard, flat surface to
extend more cutting line out. It is recommended to
operate the product on high-speed mode for dense
work areas.
This trimmer is equipped with a string cut-off blade
on the trimmer guard. The string cut-off blade
continuously trims the line to ensure a consistent
and efficient cutting diameter. This will maintain best
16
2
1
Publicité
