Publicité
USING THE NINJA
FOODI
TM
PRO GRILL & GRIDDLE – CONT .
BBQ Griddle
1
To install the pro powered grill grate,
position it in the front of the base so it
hooks in, then press down on the back
of the grate until it clicks in place. Ensure
the splatter shield is in place, then close
the hood.
2 Place flat top BBQ griddle on the grate so
the griddle sits flat. If incorrectly installed
it will tilt forward.
3 Make sure the unit is plugged in and
press
to turn the unit on.
4 Turn the dial to BBQ GRIDDLE function.
The default temperature setting will
display. To adjust temperature if desired,
press TEMP button and turn dial.
5 Press the TIME button and turn the dial
to select the desired time.
6 Press the dial to begin preheating. The
progress bars will begin illuminating.
It will take approximately 9–10 minutes
to preheat.
7 When preheating is complete, the unit
will beep and ADD FOOD will appear
on the display.
14 ninjakitchen.ca
SMART XL
TM
8 Open the hood and place ingredients on
the griddle. The countdown timer has
a 15-second delayed start. Leave hood
open unless recipe directs otherwise.
NOTE: If batch cooking meats, for
best results, we recommend in
between batches to close the hood
and run the programmed function for
2-3 minutes before adding more food.
9 When cook time reaches zero, the
unit will beep and END will appear
on the display.
10 Remove food from the griddle, then
remove the griddle from the grill grate.
11 Remove the grill grate by pressing the
orange release button on the left side of
the unit. The grate will pop from the back
then lift up.
Air Crisp
1
To install the pro powered grill grate,
position it in the front of the base so
it hooks in, then press down on the
back of the grate until it clicks in place.
Ensure the splatter shield is in place,
then close the hood.
2 Place the crisper basket on the grate
and position the basket to sit along the
rear of the grill grate so the basket feet
sit in the grill grate spaces.
3 Make sure the unit is plugged in and
press
to turn the unit on.
4 Turn the dial to AIR CRISP. The default
temperature setting will appear on the
display. To adjust temperature if desired,
press TEMP button and turn dial.
5 Press the TIME button and turn the dial
to select the desired time.
6 Press the dial to begin preheating. The
progress bars will begin illuminating.
It will take approximately 3 minutes to
preheat.
7 When preheating is complete, the unit
will beep and ADD FOOD will appear
on the display.
NOTE: While preheating is strongly
recommended for best results, you can
skip it by pressing the PREHEAT button.
ADD FOOD will appear on the display.
8 Open the hood and place ingredients
in the crisper basket. Once the hood is
closed, cooking will begin and the timer
will start counting down.
9 For best results, we recommend
shaking ingredients frequently. When
you open the hood, the unit will pause.
Use silicone-tipped tongs or oven
mitts to shake the basket. When done,
replace the basket and close the hood.
Cooking will automatically resume after
hood is closed.
10 When cook time reaches zero, the
unit will beep and END will appear
on the display.
11 Remove crisper basket from the grill
grate.
12 Remove the grill grate by pressing the
orange release button on the left side
of the unit. The grate will pop from the
back, then lift up.
ninjakitchen.ca
15
Publicité
