Télécharger Imprimer la page

Waeco CoolFun CD-32-AC Notice D'emploi page 24

Publicité

Operation
➤ Press the "HOT" pushbutton (fig. 4 5, page 3) to switch on
heating mode or press the "COLD" pushbutton (fig. 4 2,
page 3) to start the cooling.
Note
To switch between cooling mode and heating mode during
operation, press the "COLD" or "HOT" pushbutton.
✓ The red or green status indicator lights up and the device begins
cooling/heating.
Status indication
Red (fig. 4 4, page 3)
Green (fig. 4 1, page 3)
6.5
Setting the temperature
➤ Use the "TEMP" sliding switch (fig. 4 6, page 3) to set the cool-
ing temperature in cooling mode or the heating temperature in
heating mode.
Note
The following temperatures are subject to tolerance ranges and
depend on the measurement position.
Inside temperature at approx. 25 °C ambient temperature:
Status display
Sliding switch set fully to left
Cooling
Sliding switch set fully to right
Sliding switch set fully to left
Heating
Sliding switch set fully to right
24
Operating mode
Heating
Cooling
Temperature range
approx. 15 °C in interior
approx. 5 °C in interior
approx. 55 °C in interior
approx. 70 °C in interior
CD-32-AC

Publicité

loading