Publicité
CD-32-AC
6.6
Switching off the cooler
➤ Empty the cooler.
➤ Switch the cooler off.
➤ Pull out the connection cable.
If you do not want to use the cooler for a longer period of time:
➤ Leave the lid slightly open. This prevents odour build-up.
6.7
Replacing the plug fuse (12 V)
➤ Pull the adapter sleeve (fig. 6 4, page 3) off of the plug.
➤ Unscrew the screw (fig. 6 5, page 3) out of the upper half of
the housing (fig. 6 1, page 3).
➤ Carefully lift the upper half of the housing off from the lower
(fig. 6 6, page 3) half.
➤ Take out the contact pin (fig. 6 3, page 3).
➤ Replace the defective fuse (fig. 6 2, page 3) with a new fuse
that has the same rating.
➤ Re-assemble the plug in the reverse order.
7
Cleaning and maintenance
Caution - Danger of electrocution!
Always disconnect the mains plug before you clean and service the
device.
Caution - Danger of damaging the device!
Never clean the device under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during clean-
ing as these can damage the device.
➤ Clean the inside of the device with a damp cloth now and again.
Cleaning and maintenance
25
Publicité
