Publicité
CD playback
Playing a compact disc (CD/MP3)
NOTE: Never touch the laser lens located inside the CD player. Clean the laser lens using a
cleaning disk if it becomes dirty.
1.
Press the ≡ button repeatedly to select the CD function.
2.
Press the
button to open the CD holder, insert the CD (with the printed side facing up),
then press the
button again.
3.
The CD will spin for a few seconds before automatically playing the first track.
▷
4.
Press the
button to temporarily stop play. Press the
5.
Press the
button to stop playback, and press the
the beginning.
Press
twice to open the CD player.
Previous track < / Next track >
1.
Use the < and > buttons to move from one track to another, or to play a track in fast
forward mode by pressing and holding the button.
2.
Press the < button once to listen to the start of the current track. Press it twice or more to
listen to the previous tracks on the disk.
3.
Press the > button to listen to the next track on the disk.
4.
Press and hold the > button. The current track goes back to the previous track(s); when the
disk has reached the required part of the track, release the button: normal play resumes.
5.
Press and hold the > button; the current track is fast-forwarded to the next track(s).
When the disk has reached the required part of the track, release the button: normal play
resumes.
Repeat function
The button is used to repeat the same track or all the tracks of a CD.
1.
Press the button once during playback; The LCD screen displays "REP 1". The same
track is repeated continuously.
2.
Press the button a second time to repeat all the tracks. The LCD screen displays "REP
All".
3.
Press the button three times to start random playback. The screen will display "SHUFFLE".
4.
Press the button four times to start the intro playback. You will hear the first 10 seconds
of each song and "INTRO" will appear on the screen.
5.
To cancel repeat play, press the button several times until "REP OFF" is displayed.
USB reader
Music playback via USB
This device was designed with the latest technical innovations in the field of USB. However,
given the wide selection of USB storage devices available on the market, we cannot guarantee
compatibility with every device. For this reason, in certain rare cases it may be difficult to go
back to the previous song from a USB device. This is not a device malfunction.
1.
Press the ≡ button repeatedly until the screen displays "USB".
2.
Directly connect a USB storage drive to the USB port. The screen will quickly display the
number of folders and then the total number of tracks. Playback will start automatically
after a few seconds.
3.
The buttons work in the same way as for the CD player. Check out the aforementioned
section on CDs.
▷
button to resume playback.
▷
button to restart playback from
- EN 34 -
NOTE:
•
Always connect a USB storage drive directly to the USB port to avoid any malfunction.
•
The USB port is not designed for charging external devices.
•
Important: Change the device mode before removing the USB storage device.
Aux-in
Aux-in jack
1.
Press the ≡ button repeatedly to choose the Aux-in mode, and the screen will display
"AUX-IN".
2.
Connect the Aux jack connection cord of your
3.
personal player (portable MP3 player, for example) to the Aux-in jack.
4.
Start playback from your personal player.
USB charging port (5V output)
The USB port is designed to charge external devices, such as a smartphone. Its output power
is 5V 1.0 A
10W wireless charging
Simply put your QI wireless charging device onto the wireless charging area shown on top of
the main unit and charging will start simply through contact. A red light will come on and flash
in the event of a charging error.
- EN 35 -
Publicité
