Publicité
Manual search
1.
Press < or > (on the remote control) to choose the station. Every time you press the
frequency adjustment button, the frequency increases or reduces by 50 kHz.
2.
Once you find a station you want to store, press and hold the
preset station symbol and station number will appear on the screen. Press
▷
to choose the station and press
3.
Press
+ to display and listen to the radio station.
4.
Press
or
to choose the preset station to listen to the radio.
〈
〈
Menu
Search settings
In FM mode, press MENU, go to the FM settings menu, then press < / > to choose the station
search settings, and press Enter to choose the sensitivity setting:
1.
All stations: ~15dB
2.
Strong signal stations only: ~19dB
Audio settings
1.
Stereo allowed (stereo output):
2.
Forced mono (mono output)
3.
System (FM system), same setting as DAB system.
+ button and the store
to confirm and store the current station.
- EN 32 -
PRESET
1.
Preset recall (choose station):
Press
+ to choose the station stored in the preset radio stations.
or
〈
〉
2.
Storing preset stations (choose station):
You can store your favourite FM stations in the station preset memory. There are 50
presets in the radio's memory. The presets are stored in the radio in the event of a power
cut.
The process for storing presets and using them to choose your stations is the same as
in the DAB mode.
In FM mode, select the required frequency range. Press
stations. Press < or > to select the required station as described previously, then press
and hold
confirm.
Bluetooth mode
You need to carry out several steps to connect your mobile phone:
1.
Activate Bluetooth on your mobile phone (refer to the instructions for your phone).
2.
Push the
the LCD screen displays "Bluetooth". It will then be ready to be paired automatically.
3.
Using your mobile phone, search for the Bluetooth device called "MIC300".
4.
Your mobile phone will detect "MIC300" and ask if you want to connect.
To connect, enter the password 0000 (if applicable). Once the connection is made, the
"Connected" symbol will appear on the LCD screen.
Automatic connection with your smartphone
Pairing is only necessary when you first use the appliance with the phone. Once the device
has been paired with the phone, it will connect to the appliance automatically when it is turned
on and Bluetooth is activated on the phone. The next time you turn on the appliance, it will
automatically connect to the mobile phone it was last connected to.
Press and hold the Bluetooth button to disconnect the Bluetooth function.
Playing from a Bluetooth device
Once Bluetooth has been paired, press the
to the previous or next track. To pause or resume play, press the
+ to choose the preset number you want to store the station on. Press
POWER button to turn on the unit, then press the ≡ button repeatedly until
▷
button to play. Press the < or > button to switch
- EN 33 -
/
to view the stored
〈
〉
▷
to
▷
button again.
Publicité
