Publicité
DRC (Dynamic Range Control) function
DRC or Dynamic Range Control is a technology used to hear quiet sounds more clearly in a
noisy environment.
1.
In DAB mode, press the < or > button to select "DRC". Press the
"*" at the top right of the screen.
2.
Press MENU to confirm this setting. The display will return to normal.
DRC OFF - The DRC function is disabled, DRC processing will not take place.
DRC LOW - The DRC level is set at half the output level.
DRC HIGH - The DRC level is set at the full output level.
Prune (Cleaning, to remove the stations that are listed but no longer available)
In DAB mode, press < or > to display the "Prune" (cleaning) sub-menu. Press the
to choose the "Prune" (Cleaning) option.
System (DAB)
In DAB mode, press < or > to display the "System" sub-menu. Press the
the system settings sub-menu.
Language
Press à to browse the language selection; the default language is English; an "*" will appear
on the selected language display.
Users can choose between "English", "Deutsch", "Italiano", "Français", "Nederlands",
"Espanol", "Polski"
Factory Reset
Press à to restore default settings. If you want to perform a reset, press < or > to display
"YES", then confirm. Your radio will be completely reset. All the presets and station lists will
be erased.
SW Version (View the software version of the device)
Press à to view the software version of the DAB device. Press Menu or <. The display will
return to normal.
* If no operation is undertaken, the display will return to normal after 30 seconds.
▷
/à button to display
▷
/à button to enter
- EN 30 -
Preset
1.
Preset reminder
In DAB mode, press the
can press
confirm this station.
Please note: If you do not have any preset stations and press the preset button, "Empty
preset" will appear on the screen.
▷
/à button
2.
Storing preset stations
You can store your favourite DAB stations in the station preset memory. There are 50
presets in the radio's memory. The presets are stored in the radio in the event of a power
cut.
The process for storing presets and using them to choose your stations is the same as
in DAB mode:
In DAB mode, select the required frequency range. Press
required station as mentioned previously. Press and hold
the required preset list, in which the station will be stored. Press
FM radio
Carefully extend the telescopic aerial to its full extent to get the best position.
For the FM version, please ensure that the Aerial cable is unwound and released to its full
length.
Automatic search
1.
Press the ≡ button to select FM mode.
2.
Press and hold the
when it finds a station with a strong enough signal.
3.
The display updates after a few seconds. The screen shows the frequency of the station.
If the signal is strong enough and the station signal contains RDS data, the radio name
will be displayed.
4.
To find other stations, press and hold the
5.
To scan the FM band in reverse (high frequencies to low frequencies), press and hold the
> button for 2 seconds.
6.
Once the end of the frequency range is reached, the device begins searching for
frequencies again, starting from the other end of the range.
7.
Press
8.
Press < / > (on the main unit) or
station and start listening.
+ button. The "Preset reminder" symbol will appear, then you
/
to select the station stored in the preset memory. Press à to
〈
〉
▷
button. The radio will scan the frequencies and stop automatically
▷
button as before.
+ to display the preset radio stations.
/
(on the remote control) to select the stored
〈
〉
- EN 31 -
or
to choose the
〈
〉
+ to choose the number of
▷
to confirm.
Publicité
