Publicité
TEST DISHWASHER
WARNING
If using a direct wire cable, turn on power at source.
•
If using a power cord, plug cord into a grounded 3-prong outlet.
•
Make sure the power cord does not touch the motor or the lower
part of the dishwasher tub, and then turn on power at source.
Connect to power supply.
1.
On the Control Panel, press the controls needed to start the shortest
2.
cycle. See the User Manual for instructions.
Firmly close the dishwasher door within 4 seconds of pressing START.
3.
After the first 2 minutes, open the door. Check to see that there is
4.
water in the bottom of the dishwasher tub. If water has not entered the
dishwasher, check that the water and power supplies are turned on.
34
Electrical Shock Hazard
Electrically ground dishwasher.
•
Connect ground wire to green ground connector in
•
terminal box.
If connecting with a power cord:
Plug into a grounded 3-prong outlet.
•
Do not use an adapter.
•
Do not remove the ground prong from the power cord
•
plug.
Do not use an extension cord.
•
Failure to follow these instructions can result in death,
•
fire, or electrical shock.
Publicité
