Télécharger Imprimer la page

Midea MDT24H14ASTC Instructions D'installation page 22

Publicité

NOTE: Do not push against the front of the panel or on the console –
they will dent.
Reposition dishwasher by
grasping both sides with hands.
Push dishwasher completely into the opening so that the front corners
4.
of the dishwasher door are flush with the cabinet doors.
NOTE: It is all right if the dishwasher fits tightly into cabinet opening. Do
not remove insulation blanket – the blanket reduces the sound level.
LEVEL DISHWASHER
IMPORTANT: Dishwasher must be level for proper dish rack operation and
wash performance.
Level the dishwasher so that its front panel is aligned with the adjacent
1.
cabinet doors.
NOTE: With some installations, it may be easier to adjust the front leg
using a flat blade screwdriver.
To Lower - Turn the leveling leg counterclockwise.
To Raise - Turn the leveling leg clockwise.
22
Check that the leveling legs are firmly against the floor.
2.
Close and latch the door, and place level against the front panel. Check
3.
that dishwasher is plumb. If needed, adjust leveling leg or add shims
until dishwasher is plumb.
NOTE: Shims must be securely attached to floor to prevent their
movement when the dishwasher is operated.
Repeat for other side of dishwasher.
4.
a
To Raise
To Lower
Do not push against front door
panel with knee. Damage to the
door panel will occur.
a
Raise one side of
the dishwasher

Publicité

loading