Publicité
CONNECT POWER CORD
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
•
Do not remove the ground prong from the power cord
•
plug.
Do not use an adapter.
•
Do not use an extension cord.
•
Failure to do so can result in death, fire or electrical
•
shock.
IMPORTANT: The power cord and connections must comply with the
National Electrical Code, Section 422 and/or local codes and ordinances.
Recommended cord length is 54" min. and 64" max.
Confirm that power is turned off at the source.
1.
Remove junction box cover. Retain for later use.
2.
Install a UL listed/CSA approved strain relief.
3.
Route power cord in the channel on the right-hand side of the
4.
dishwasher base. Make sure that the dishwasher is not resting on and/
or pinching the wire.
Pull the power cord through the strain relief in the junction box.
5.
a
a
Strain Relief
25
Publicité
